Parameters |
Specification |
Applicable fibers |
SM (G.652 & G.657), MM (G.651), DS (G.653), NZDS (G.655) |
Fiber Count |
Single core |
Actual average splice loss |
0.02dB (SM)
0.01dB (MM)
0.04dB (DS)
0.04dB (NZDS) |
Return Loss |
> 60dB |
Typical Splicing Time |
Typical 9 sec (standard SM fiber) |
Typical Heating Time |
Typical 18 sec (time can be set and temperature can be adjusted) |
Splicing Mode |
Auto, Calibrate, Normal, Special |
Fiber Aligning Method |
Meticulous, Core, Clad, Manual |
Fiber Diameter |
Cladding diameter: 80 ~ 150μm
Coating diameter: 100 ~ 1000μm |
Fiber Cleaved Length |
12-16mm (Coating diameter: 250μm) |
Splicing Program |
53 (factory mode), 100 (user mode) |
Fiber Holder |
Multifunctional holder (used for bare fiber, pigtail, patch cord and drop cable) |
Tube Heating Program |
11 (factory mode), 40 (user mode) |
Heating Control Mode |
Automatic/Manual |
Heat Shrink Tubing |
40 mm, 60 mm etc. |
Tension Test |
2N |
Electrode Life |
5000 |
Storage of Splice Loss |
10000 pieces |
Monitor |
4.3 inch color LCD monitor |
Fiber Image Magnification |
300X (X or Y view), 150X (X and Y view) |
Communication Interface |
USB |
Battery |
Li-battery, no less than 300 times (splicing and heating) |
Power Supply |
Input AC 100 ~ 240V
Output DC 13.5/4.8A |
Operating Condition |
0-5000m above sea level, -10 ~ +50℃ |
Max wind velocity of 15m/s |
Storage Temperature |
-40 ~ +60℃ |
Humidity |
0 ~ 95% (no condensing) |
Dimensions |
138 (L) × 163 (W) × 140(H) |
Weight (Not including battery) |
1.63kg |
Weight (Including battery) |
1.96kg |